Type J DPC Support and Closer Cavity Trays - Cavity TraysType J DPC Support and Closer Cavity Trays - Cavity Trays

Type J DPC Support and Closer

  • Standard lengths 2400mm.
  • J1 closer make it suitable for use in cavities up to and including 90mm.
  • J2 is a larger closer suitable for use in cavities up to and including 100mm.
  • J3 is a bespoke closer – All dimensions available.
  • Material PVCU (Polypropylene bespoke).

USE
Parapet construction requires a DPC immediately under the coping. BS5628:Part 3 qualifies the manner in which the DPC must be supported. The Type J closer fulfils the requirements of the British Standard, and also the N.H.B.C. performance standard, chapter 6.1-S4 (b). The conventional cavity parapet is normally terminated with copings, under which a DPC is bedded and positioned. The width of the DPC must be sufficient to slightly overhang the width of the parapet masonry. Support of the DPC is required where it crosses the cavity.

Description

Parapet construction requires a DPC immediately under the coping. BS5628:Part 3 qualifies the manner in which the DPC must be supported. The Type J closer fulfils the requirements of the British Standard, and also the N.H.B.C. performance standard, chapter 6.1-S4 (b). The conventional cavity parapet is normally terminated with copings, under which a DPC is bedded and positioned. The width of the DPC must be sufficient to slightly overhang the width of the parapet masonry. Support of the DPC is required where it crosses the cavity.

The Type J is designed for such purposes.

J1 = 130mm x 30mm x 2mm/2.5mm.

J2 = 150mm x 30mm x 2mm/2.5mm.

J3 – Bespoke 180mm x 30mm x 2mm.

Downloads and Documents

Datasheet PDF636.46 KB Download file

DWG/CAD47.55 KB Download file

View all resources

Need help?

Our experts are on hand to advise you about any of our cavity tray products.

Call 01935 474769

Where to buy

Our cavity trays are available from suppliers up and down the country.

Find a local SUPPLIER