Type CLV Circular Louvered Ventilator Ventilation - Cavity TraysType CLV Circular Louvered Ventilator Ventilation - Cavity Trays

Type CLV Circular Louvered Ventilator

  • Polypropylene.
  • Size 79/70mm x 15mm – Requires 70mm hole.
  • Free airflow 2100mm².
  • Louvers deflect driving rain and provide insect screening.
  • Integral location grips.
  • Colours – White, Black, Brown, Beige or Terracotta.

USE
Type CLV Circular Louvered Ventilator

Description

The Type CLV is popular in after-fit drill and vent applications. It can be introduced when the wet trades have finished. It differs from most circular ventilators as it has an airflow aperture rating of 2100mm². The installer is required to drill fewer holes around the building, as fewer ventilators are required to provide the requisite levels of ventilation.

Example: If a small circular vent has a free area of 300mm, it would require seven such ventilators to equal the free area of one Type CLV. The Type CLV is commonly installed at 1.2m centres to fulfil ventilation requirements in typical applications and is offered in a range of masonry harmonising colours: Terracotta, Black, White, Buff and Brown. Projecting location grips hold the Type CLV in place when inserted into the drilled hole.

Downloads and Documents

Datasheet PDF552.85 KB Download file

View all resources

Need help?

Our experts are on hand to advise you about any of our cavity tray products.

Call 01935 474769

Where to buy

Our cavity trays are available from suppliers up and down the country.

Find a local SUPPLIER