Product Ranges

Type CLV Circular Louvered Ventilator

The Type CLV is popular in after-fit drill and vent applications. It can be introduced when the wet trades have ...

The Continuous Running Soaker Strip is pre-shaped for immediate use.It resembles lead in colour and may be employed with ...

The CRSV differs from the standard CSV as it has a deep body that protrudes up into the soffit box....

The upgraded CSV Circular Soffit Ventilator may be introduced into new soffits or existing soffits. It permits easy and quick ...

The Type CV Corbel Ventilator is designed to be incorporated above a running masonry corbel built of brick, stone or ...

In buildings constructed of cavity walls, whenever there is a window or door opening it is necessary to close the ...

The Type DIP (Type D Interfacing Profile) is used where the mason is returing block work at the reveal in ...

The inboard section of the DPC extends 150mm minimum beyond the inside face of the internal skin to facilitate positive ...

The Type E Cavity Tray is a unique and innovative solution designed for retrofitting into existing cavity walls. This preformed <...

The eaves comb filler is manufactured from polypropylene in one metre easy to handle lengths. The supple teeth of the ...

The Eaves Continuous Slate Course replaces the eaves first slate course and establishes rigidity and consistent support off which the ...

The eaves roll-out ventilator is manufactured in PVCU. The cross corrugations permit this product to be supplied in long rolls ...

The Type ERV External Roof Ventilator is designed to permit the roof void to breathe and prevent condensation occurring. Intended ...

The new Type F corrugated flashing units can be used on porches, lean-tos, outhouses, conservatories or temporary structures having lightweight ...

FWC stands for Five Width Cavicloser, being the number of different cavity widths accommodated by this versatile closer. The insulation ...

The Type G is supplied in preformed lengths and preformed angles. Long runs can be rapidly laid with adjoining sections ...

An appropriately profiled cavitray is required where a balcony extends outwardly from the face of the building. Where a doorway ...

The Type I in-screed services duct is designed to accomodate pipes or electrical wiring required to pass through a screeded ...

Parapet construction requires a DPC immediately under the coping. BS5628:Part 3 qualifies the manner in which the DPC must be ...

The Type K cavitray is manufactured from solid DPC and is supplied in one piece ready to receive the circular ...

The use of the Type L lintel stopend quickly and economically introduces a lintel feature which removes the problems and ...

The L90 stopend differs from our standard Type LAS bescause it does not adjust and is intended for use with ...

Type LTT Level Threshold Tray (Threshold Isolation DPC) The Type LTT encapsulates the threshold masonry so the transmittance of damp ...

The Type M cavitray provides horizontal protection against damp penetration where a cavity wall accommodates an electricity or gas meter ...